Diameter Tapers

Tapers are designed for a mode conversion of 0.1% or less over either narrow or broad bands. Narrow-band tapers are specially designed for minimum length.

Many other similar tapers have been made for narrowband and broadband applications. For example, a 2-meter long 31.75 to 63.5 mm waveguide taper in corrugated waveguide was made for under 0.1% mode conversion from 100 to 180 GHz.

(Click images to see entire photo)

110 GHz, 31.75 to 60.3 mm diameter taper in corrugated waveguide, with CF flange on large end and machining for standard waveguide coupling on small end

110 GHz, 31.75 to 60.3 mm diameter taper in corrugated waveguide, with CF flange on large end and machining for standard waveguide coupling on small end

Cooled 140 GHz 31.75 to 63.5 mm diameter taper in corrugated waveguide.

Cooled 140 GHz 31.75 to 63.5 mm diameter taper in corrugated waveguide.

TE11 taper in smooth waveguide.

TE11 taper in smooth waveguide.

TE01 taper in smooth waveguide.

TE01 taper in smooth waveguide.

Contact

Ray O’Neill, GA-ITER Program
oneill@fusion.gat.com
(858) 909-5214

John Doane, GA-MFE Technologies
doane@fusion.gat.com
(301) 362-9097